dc.description.abstract |
Internal curing concrete provides number of advantages in the concrete construction industry.
It provides adequate water to hydrate all the cement. Moreover, internal curing increases the
durability, compressive strength and eliminates the formation of shrinkage cracks. The most
popular internal curing materials are the manufactured and natural lightweight aggregates.
Those aggregates generally produce using expansive clays. Natural lightweight aggregates
and expansive clay mines are not available in most countries limiting the production of internal
curing concrete to a few countries. Moreover, those aggregates have various disadvantages in
use of internal curing concrete production. Mainly, it reduces the compressive strength of
concrete. Furthermore, some aggregates have lower water absorption capacity, and some have
lower water desorption capacity. Thus, the main focus of this research is to develop an effective
pore structure for internal curing aggregate using non-expansive clays.
Different clay samples were obtained from local mine in Nachchaduwa, Dankotuwa, Metiagoda,
and another clay sample was imported from China. Subsequently, those were chemically
analyzed, and the percentage of each chemical composition was obtained. Afterwards,
selected clay types were identified as bloating and unbolting clays according to the method
that was suggested by Charles M. Riley. Nachchaduwa and dankotuwa; Metiagoda and China
clay samples were identified as bloating and unbolting clays respectively. After that, the level
of expansion was identified based on the bloating coefficient. All the clay samples showed
lower bloating coefficient than 2.5. Thus, they were categorized as non expansive clays.
The requirements for effective internal curing aggregates were identified through an extensive
literature review and limits of those parameters were defined based on the literature review.
Moreover, a aggregate production process was established by considering various effect of
clay heating on development of pore structure. The effective range of heating temperature of
each clay type was identified according to a simultaneous thermal analysis. Subsequently, clay
specimens of equal sizes were prepared using each clay samples and heated at selected range
of temperature to produce various pore structures within the clay specimens. Afterwards,
heated samples were cooled, crushed, and fine aggregates were produced. Pore size, pore
connectivity, pore strength and the pore expansion of each aggregate were identified through
an extensive analysis of the pore structure. Afterwards, the aggregates were categorized based
on the properties of the pore structure of each aggregate.
The internal curing properties of those pore structures were measured based on water absorption,
water desorption and density of the aggregates. Afterwards, performance of those pore
structures was identified, and limits of the effective pore structures were defined. Bloted nonexpansive
clay materials were identified as the most suitable materials to produce effective
pore structure within heated clay mass. Conversely, unbloted non-expansive materials were
not suitable to produce internal curing aggregate. According to the research findings, the effective
pore structure should contain at least 27% of open porosity. The mean pore radius and
the pore expansion should range from 0.3 to 0.5 m and from 1.1 to 1.5 mean bloating coefficient
respectively. Furthermore, the compressive strength of pore structure should be greater
than 10N/mm2.
Finally, two different aggregates which have the effective pore structure and less effective pore
structure were selected for verification process. The selected aggregates were produced in
larger scale using industrial facilities of Rajarata and Midaya factories. Subsequently, three
different types of grade 30 concrete were prepared from each aggregate type to validate the effectiveness
of pore structure. Those concrete types were external curing concrete (ECC), nonii
curing concrete (NCC) and internal curing concrete (ICC). Moreover, internal curing concrete
with 3 days external curing (ICC/3EC) was prepared to study the combined effect of external
and internal curing. ECC specimens were kept under submerged for curing, ECC/3EC samples
were kept in submerged only for 3 days. NCC and ICC specimens were kept in open space.
During the preparation of concrete specimens, workability of the samples was measured. Afterwards,
concrete specimens were tested to obtain the compressive strength values at 7, 14 and
28 days. Subsequently, the drying shrinkage of the internal curing concretes which contain the
selected aggregates was measured. According to those results, the aggregates which contain
the effective pore structure exhibit effective internal curing properties while other aggregate
failed to act as an effective internal curing aggregate |
en_US |