dc.contributor.author |
Kandemulla, KASM |
|
dc.contributor.author |
Maduwantha, ARL |
|
dc.contributor.author |
Fernando, EASK |
|
dc.contributor.author |
Niles, SN |
|
dc.contributor.author |
Jayawardana, TSS |
|
dc.contributor.editor |
Chathuranga, D |
|
dc.date.accessioned |
2022-09-01T09:51:36Z |
|
dc.date.available |
2022-09-01T09:51:36Z |
|
dc.date.issued |
2018-05 |
|
dc.identifier.citation |
K. A. S. M. Kandemulla, A. R. L. Maduwantha, E. A. S. K. Fernando, S. N. Niles and T. S. S. Jayawardana, "Analysis of the Dimensional Change of Woven Fabrics from Loom State to Finished State," 2018 Moratuwa Engineering Research Conference (MERCon), 2018, pp. 90-95, doi: 10.1109/MERCon.2018.8421891. |
en_US |
dc.identifier.uri |
http://dl.lib.uom.lk/handle/123/18834 |
|
dc.description.abstract |
Dimensional change of a woven fabric is a
challenge in woven fabric production. The phenomenon
originates from the dimensional instability of the fabric.
Shrinkage is a combined result of numerous factors such as
relaxation, dyeing, finishing and the effect of machinery. The
significance of this problem has been investigated by several
researchers, who focused mainly on the geometry of the fabric
during the weaving phase (loom stage) only. To investigate the
dimensional changes that occur within a particular woven
structure, a number of fabric samples were sent through various
finishing processes such as, washing, dyeing & finishing, under
the laboratory conditions. The changes were measured either in
terms of dimensional change or EPI and PPI values. Using the
experimental data and theoretical analysis, a mathematical model
has been developed and validated. However initially the focus is
laid on plain woven fabrics and it is expected to be further
extended to the other woven structures as well. |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
IEEE |
en_US |
dc.relation.uri |
https://ieeexplore.ieee.org/document/8421891 |
en_US |
dc.subject |
Dimensional change |
en_US |
dc.subject |
woven fabrics |
en_US |
dc.title |
Analysis of the dimensional change of woven fabrics from loom state to finished state |
en_US |
dc.type |
Conference-Full-text |
en_US |
dc.identifier.faculty |
Engineering |
en_US |
dc.identifier.department |
Engineering Research Unit, University of Moratuwa |
en_US |
dc.identifier.year |
2018 |
en_US |
dc.identifier.conference |
2018 Moratuwa Engineering Research Conference (MERCon) |
en_US |
dc.identifier.pgnos |
pp. 90-95 |
en_US |
dc.identifier.proceeding |
Proceedings of 2018 Moratuwa Engineering Research Conference (MERCon) |
en_US |
dc.identifier.email |
131023J@uom.lk |
en_US |
dc.identifier.email |
131032K@uom.lk |
en_US |
dc.identifier.email |
sandunf@uom.lk |
en_US |
dc.identifier.email |
niles@uom.lk |
en_US |
dc.identifier.email |
jaya@uom.lk |
en_US |
dc.identifier.doi |
10.1109/MERCon.2018.8421891 |
en_US |