Abstract:
This study aims to investigate the stabilization of three sandy soils with the addition of waste
plastics, Bamboo Leaf ash (BLA), Banana Leaf ash (BALA) and a leaf ash mixture based on
the enhancement in the MDD (Maximum Dry Density), OMC (Optimum Moisture Content),
Soaked CBR (California Bearing Ratio), Shear strength parameters and Atterberg Limits. The
soil stabilizers used in the study are the plastics strips from waste plastic file folders, BALA,
BLA and a pozzolanic leaf ash mixture of five commonly available pozzolanic leaves in Sri
Lanka. Plastics used in the study have 5 mm width and Aspect Ratios (ARs) of 1, 2, 3, and 4
in the weight percentages 0.5, 1, 2, 4, and 8. BALA, BLA and the leaf ash mixture used in the
study are in the weight percentages 2, 4, 6, 8, and 10. The most significant improvement in
MDD was achieved when 2 % of plastics with an AR 02 was mixed with soil 01. For soil 02,
the best improvements in MDD with almost similar values were observed with the addition of
6 % of all the considered ashes. For soil 03, the best improvements in MDD with almost similar
values were achieved with the addition of 6 % of BLA and the leaf ash mixture. The optimum
improvement in soaked CBR for each soil was around (2-3) times compared to the virgin state.
The optimum improvement in soaked CBR was observed with the addition of 6 % of BLA for
all three soils. Shear strength parameters improved in almost all cases of the addition of plastics
and ashes. A reduction of plasticity index (PI) was noted on all three soils with the addition of
2, 4 and 6 % of ashes. Soil 03 mixed with 2 % plastics of AR 03, 8 % BALA, 6 % BLA and 6
% mixture of pozzolanic ashes showed satisfactory results to be used for the upper subbase
layer in flexible pavement constructions in Sri Lanka.
Citation:
Yathushan, V. (2022). Stabilization of soil with plastic waste and leaf ash [Master's theses, University of Moratuwa]. Institutional Repository University of Moratuwa. http://dl.lib.uom.lk/handle/123/21380