Institutional-Repository, University of Moratuwa.  

Development of iso standard sand from local silica sand deposits for cement testing

Show simple item record

dc.contributor.author Ellegama, EGHDB
dc.contributor.author Muthurathne, SSK
dc.contributor.author Nanayakkara, SMA
dc.contributor.editor Mallikarachchi, C
dc.contributor.editor Hettiarachchi, P
dc.contributor.editor Herath, S
dc.contributor.editor Fernando, L
dc.date.accessioned 2023-10-10T05:09:32Z
dc.date.available 2023-10-10T05:09:32Z
dc.date.issued 2023-09-27
dc.identifier.citation ** en_US
dc.identifier.uri http://dl.lib.uom.lk/handle/123/21530
dc.description.abstract ISO standard sand is a siliceous natural sand used in the testing of cement for the SLSI certification process, material approval in construction projects, and material clearance in importing cement. Testing laboratories in government institutes and cement manufacturers import standard sand as it is not produced in Sri Lanka. According to the market survey carried out among the cement manufacturers and testing agencies, standard sand is imported mainly from China, France and Germany. Under the current economic situation in Sri Lanka, the government has imposed restrictions on importing standard sand required for the testing of cement. Hence, this research is mainly focused on developing ISO standard sand using locally available materials. There are several requirements for standard sand specified in SLS ISO 679 – Methods of testing cements – Determination of Strength, such as particle size distribution, and moisture content, and it must be verified with reference sand. The main mineral phase in standard sand and reference sand is Quartz. Hence, locally available vein quartz and silica sand were selected for this study due to their high silica content. Silica sand was obtained from the Marawila area in the Puttalam district, and Quartz powder from Naula in the Matale district. The sieve analysis was conducted for both washed silica sand and Quartz powder using the relevant sieves to separate each size fraction. It was observed that the percentage of particles less than 150 microns in silica sand from Marawila was very small. Therefore, Quartz powder was used to meet the particle size fraction less than 150 microns requirement. Standard sand was prepared by combing both silica sources to satisfy the requirements specified in SLS ISO 679. The compressive strength of cement mortar samples prepared with imported ISO standard sand and standard sand prepared with local sand were determined as per the procedure given in SLS ISO 679 standard. It was observed that the particle size distribution of ISO Standard sand has a considerable effect on the compressive strength of cement mortar, even when it is within the recommended band limits as specified in SLS ISO 679. It was also observed that, even with the same particle size distribution, there was a variation of strength between different sand sources. These results indicate the importance of controlling not only particle size distribution but also characteristics of sand particles, such as particle shape and surface texture, when developing standard sand in order to obtain consistent results when testing cement for strength. Inter-laboratory test results of different cement types with the developed local standard sand indicate that the repeatability and reproducibility of the compressive strength test results are at a satisfactory level. en_US
dc.language.iso en en_US
dc.publisher Department of Civil Engineering en_US
dc.subject ISO standards sand en_US
dc.subject Silica sand en_US
dc.subject Cement testing en_US
dc.subject Compressive strength en_US
dc.title Development of iso standard sand from local silica sand deposits for cement testing en_US
dc.type Conference-Abstract en_US
dc.identifier.faculty Engineering en_US
dc.identifier.department Department of Civil Engineering en_US
dc.identifier.year 2023 en_US
dc.identifier.conference Civil Engineering Research Symposium 2023 en_US
dc.identifier.place University of Moratuwa, Katubedda, Moratuwa. en_US
dc.identifier.pgnos pp. 19-20 en_US
dc.identifier.proceeding Proceedings of Civil Engineering Research Symposium 2023 en_US
dc.identifier.email heshandbandara@gmail.com en_US


Files in this item

This item appears in the following Collection(s)

  • CERS - 2023 [55]
    Civil Engineering Research Symposium 2023

Show simple item record