dc.description.abstract |
The world is reaching towards the sustainable transportation and the public
transport sector especially requires a better focus and attention. Public transport network
can be better distinguished as mass transit systems and feeder systems. Mass transit
systems strengthens the transport network as backbone transport systems. However, it
does not enable the connection between the origins such as the residence or the work place
and the mass transit access points. This connection which is a vital component is enabled
by the feeder modes. There can be several variations in feeder modes. Especially it can be
recognized as private feeders and public feeders. Without a proper feeder network, the
maximum potential of a mass transit network may not be achieved.
In this research, the focus is on the Light-Railway transit which is the most recent
mass transit system that is being introduced to Sri Lanka. As the first step of introducing
the light railway system to Sri Lanka, Fort-Malabe LRT was planned to be implemented.
Even though the plans by the Government have changed, in this research, Fort- Malabe
LRT line is taken as the case study in order to carry out the objectives. The feeder modes
that are supplying to the LRT line were recognized as private vehicle drop offs, paratransit
modes and
short length public
transit
modes.
In order to get an uninterrupted connection between the origin and the mass transit
access station, the development of feeder network that will be serving the mass transit has
to be parallel with the development of the mass transit system. However, the LRT
orientated development also has to be limited by the necessity. In order to get a realistic
estimation on the development required area, the spatial extent of access areas by different
access modes have to be identified.
The spatial area where potential transit users will origin their trip to use the mass
transit can be identified as the catchment area. Catchments for different feeder modes may
vary depending on the distance that users prefer to travel by that particular feeder mode.
Catchment areas for multiple access modes were recognized using the survey data which
were available from a previously carried out survey.
In identifying catchment distances for different feeders, two methods were
followed. First method was to consider each station and identify the preferred travel
distances by a certain feeder mode to reach that station and thereby calculating a weighted
average catchment distance for the chosen station for that particular mode. To calculate a
catchment distance value which justifiably represents all the stations for a certain feeder
mode, an average value was calculated.
Second method that was carried out was to consider the LRT route aligned corridor
and identify catchment distances for each feeder mode which will represent the Fort-
Malabe corridor rather than each station. The individuality of stations was not considered.
To identify the catchment distance for a specific feeder mode, all data records of trips
originating from a catchment to reach any station by that mode were taken in to account.
The frequency of access distances occurring was the basis of the second method.
Therefore, the frequency of a certain access distances occurring was identified and thereby
the cumulative frequency of access distances was taken. When the accumulation of
frequency reached 85
th
percent, the catchment distance at the point was taken as the
catchment distance for that certain feeder.
In order to determine the geographical buffer area, two approaches were identified
that can be utilized. First was the circular buffer approach which takes the Euclidean
catchment distance from the LRT station locations. Aspects such as the geographical
barriers and the non-availability of road network were not considered in this case. The
other approach was to take the service area. In this approach the travel distance of the
catchment is determined via the road network. Considering the pros and cons of two
approaches and the accuracy of the results by each approach, service area approach was
appointed to be used. Thereby the catchment areas were configured for the access modes.
The catchment areas for each feeder type were visualized with the use of Geographical
Information Systems (GIS).
In the case of the bus feeders, it was observed that the catchment area also depends
on the bus route path layout. Areas which are parts of the bus catchment but does not get
supplied with the bus network, can be identified separately. In this scenario, Conveyal
analysis was used to identify the bus catchment which is limited by the availability of bus
routes in the catchment which is bounded by the catchment distance. As per the first
objective of the research, catchment area for multiple feeder modes were identified as
above. |
en_US |