Show simple item record

dc.contributor.advisor Damruwan HGH
dc.contributor.advisor Lewangamage CS
dc.contributor.author Thadsanamoorthy P
dc.date.accessioned 2024-08-30T07:41:33Z
dc.date.available 2024-08-30T07:41:33Z
dc.date.issued 2023
dc.identifier.citation Thadsanamoorthy, P. (2023). Investigation of ground vibrations due to moving trains [Master's theses, University of Moratuwa]. Institutional Repository University of Moratuwa. http://dl.lib.uom.lk/handle/123/22765
dc.identifier.uri http://dl.lib.uom.lk/handle/123/22765
dc.description.abstract This research focuses on the assessment of train-induced ground vibrations through experimental analysis and the development of a Finite Element (FE) prediction model. The study aims to evaluate the intensity of vibrations caused by trains and understand their effects on different soil types and train speeds. A vibration sensing device named "VIBSEN" was developed for the measurement of ground vibrations. Experimental data were collected at 3m intervals from the centreline of the railway track and processed using MATLAB software. The accuracy of the device was confirmed through gravity calibration and comparison with a vibrometer. Based on the experimental study conducted at a specific site, it was determined that the minimum safe distance from the centreline of the track is approximately I Om when two trains cross simultaneously and approximately 6m when considering the passage of a single train. It should be noted that these recommendations are specific to the soil profile at the experimental site and may vary depending on subgrade soil type and parameters. The FE prediction model, developed using MIDAS GTS NX FE software, was validated using experimental results from the study and further compared with literature data. The model successfully predicted train-induced ground vibrations, demonstrating its applicability. Parametric analysis was conducted to investigate the effects of soil type and train speed on vibration intensity, including the identification of resonance frequencies and critical velocities. The findings of the study indicate that vibration intensity varies significantly depending on the soil type, with lower intensities observed for soils with higher elastic moduli. Additionally, the study highlighted that vibration intensity increases with train speed, and certain speed levels may lead to a sudden increase in intensity due to resonance effects. The resonance frequency was found to be influenced by the elastic modulus of the subgrade soil. Overall, this study provides valuable insights into train-induced ground vibrations and offers recommendations for safe distances from the track centreline. The developed VIBSEN device and FE prediction model offers reliable tools for future investigations and allow for parametric studies considering different soil properties, train loads, and speeds. These findings contribute to mitigating risks, minimizing structural failures, and reducing hazards associated with prolonged exposure to vibrations. en_US
dc.language.iso en en_US
dc.subject TRAIN–INDUCED GROUND VIBRATION
dc.subject VIBSEN DEVICE
dc.subject PEAK PARTICLE VELOCITY (PPV)
dc.subject FINITE ELEMENT PREDICTION MODEL
dc.subject CIVIL ENGINEERING - Dissertation
dc.subject MSc in Civil Engineering
dc.title Investigation of ground vibrations due to moving trains en_US
dc.type Thesis-Full-text en_US
dc.identifier.faculty Engineering en_US
dc.identifier.degree MSc in Civil Engineering By research en_US
dc.identifier.department Department of Civil Engineering en_US
dc.date.accept 2023
dc.identifier.accno TH5237 en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record