Abstract:
The shear behaviour rock joints infilled with graphite, bentonite and clayey sand under
eNS conditions were studied through a comprehensive laboratory testing programme to
assess its influence on rock mass stability. A range of infill thicknesses such as 1.5, 3, 6
and 9mm, initial normal stresses (O'no) of 0.56, 1.1 and 2.43 MPa and two idealized joint
types with 9.5° (Type 1) and 18.5° (Type 2) asperity angles were used in testing
(Indraratna, Welideniya and Brown. 2005). This paper describes analysis of test results
leading to better understand the effect of mobilised and apparent friction angles on shear
strength envelope.