• Noice reduction in control signals of industrial sewing machines using adaptive filtering 

  Niranjan KHVC [Thesis-Abstract]

  Control signals of a typical industrial sewing machine are distorted when they are con­ nected to the controller. Such distortions due to noise appear at the input port of the control signals and they are, in general, ...
• Probability distributions of inter - sample time of event - based sampling encoders 

  Wanniarachchi MS [Thesis-Abstract]

  Bandwidth is the most important resource in telecommunications. Though recent developments have resulted in a significant increase of available bandwidth, the demand for bandwidth continues to follow and new demands are ...
• A Novel multi-dimensional IIR notch filter for attenuating multiple narrowband interferences 

  Chandima PKT [Thesis-Abstract]

  Notch filters are a class of filters that are used to attenuate narrowband interferences. Previously reported finite impulse response (FIR) or infinite impulse response (IIR) notch filters are predominantly limited to ...
• Empirical formulas to estimate the order of 2-D fir fan filters 

  Jayathissa RHNS [Thesis-Abstract]

  Two-dimensional (2-D) finite impulse response (FIR) fan filters belong to a special class of 2-D filters which has the capability of directional filtering. They are used in many applications such as geological and seismological ...
• Hand activity recognition using a wearable smart glove 

  Samarasinghe JNG [Thesis-Full-text]

  This project is aimed at designing, simulating and constructing a wearable device capable of performing activity recognition to track and monitor activities specific to the manufacturing industry. This was done by designing ...
• Vision-based real-time traffic control using artificial neural network on general-purpose embedded hardware 

  Zoysa HKG [Thesis-Full-text]

  In urban cities, tra c management of intersections is a substantially challenging prob- lem. In appropriate tra c control leads to waste of fuel, time, and productivity of nations. Though the tra c signals are used to ...
• A study of lower limb motions using inertial measurement units 

  Lalitharathna, SWHMTD [Thesis-Abstract]

  Lower limb motions are vital for human to maintain their everyday life. However, ability ofthe lower limb movements can be affected by different problems. Due to many reasons there large numbers of the population live with ...
• Design and simulation of fuzzy inference based multiple PID controllers for 6-dof unmanned underwatter vehicle 

  Makawita, CD [Thesis-Abstract]

  Unmanned underwater vehicles are currently being utilised for scientific, commercial and military underwater applications. These vehicles require autonomous guidance and control systems in order to perform underwater tasks. ...
• A PID feedback control system for utilizing a RF emission tube at the maximum efficiency 

  Wijayakoon SB [Thesis-Full-text]

  Thermal emission tubes are expensive electron devices regularly used in numerous applications such as Radio Frequency (RF) amplifiers, medical instruments, etc. Such a thermal tube designated as TH558E is used as a RF ...
• Design and implementation of an automatic wire cutting and striping machine for small scale industry 

  Kanagalingam S [Thesis-Full-text]

  The trend in the recent industry is to move towards automation. This is driven by a number of factors such as increasing accuracy and decreasing human errors. This dissertation provides full overview of the development and ...
• Analysis of the performance of MQTT with shared dictionary compression (SDC) in IOT networks 

  Vinyagamany S [Thesis-Full-text]

  The Internet of Things or IOT is a set of organized computing devices that are provided with exclusive identifiers and the ability to transfer data over a network without requiring human-to-human or human-to-computer ...
• Jvalue based biomass and growth rate estimation of Duckweed 

  Wimalaratne DRSK [Thesis-Full-text]

  Duckweeds are known as Lemnaceae, comes under the family of small aquatic plants which grows forming a mat covering the surface of the water. Worldwide duckweeds are used as an effective wastewater treatment through ...
• Cost savings from enhanced noise reduction based blowdown control for the State Pharmaceuticals Manufacturing Corporation (SPMC) 

  Jayasundera PD [Thesis-Full-text]

  Boilers are widely used in most of the processing industries like Pharmaceuticals Manufacturing, for the heating applications. State Pharmaceuticals Manufacturing Corporation (SPMC) is the one of the largest Pharmaceuticals ...
• Statistical models for long term network traffic in enterprise networks 

  Atugoda AWCK [Thesis-Full-text]

  With the rapid development of the internet it has converted the world into a global village and now a day we cannot even think of a micro second down time. For an instance, user demand has caused the internet to successfully ...
• CMOS leakage power reduction and data retention 

  Udayanga GWGKN [Thesis-Full-text]

  As silicon technology scaling, leakage power dissipation has become the most significant component from all CMOS power dissipation mechanisms. Minimum Leakage Vector(MLV) is used as a combinational logic leakage power ...
• FPGA Implementation of EEG classifier using LDA 

  Ellawala NM [Thesis-Full-text]

  Design and implementation of feature classification in Electroencephalography (EEG) signal processing system on Field Programmable Gate Array (FPGA) hardware platform is presented in this thesis. Today there is a growing ...
• Time optimized smooth trajectory generation for 2DOF and 3DOF redundantly actuated cable suspended parallel robots 

  Boralugoda MBLC [Thesis-Full-text]

  Cable Suspended Parallel Robots (CSPR) are a type of cable driven parallel manipulators (CDPR) that has recently become popular for large workspace operations. They possess many advantages over common parallel robot ...
• Trajectory planning for 6-DOF robot manipulator based on offline robot programming approach 

  Fernando, MDM [Thesis-Full-text]

  Industrial robot manipulators are highly involved in modern manufacturing industries. Robot programming is the procedure to carry out generating a sequence of robot instruction. Teaching method is highly applied where a ...
• Network implementation petri net model for Laxapana power plant complex 

  Ganegoda DT [Thesis-Full-text]

  Laxapana Hydro Power complex consists of five Reservoirs & five Power stations. These power stations are located along the Kehelgamuwa Oya & the Muskeli Oya. The total capacity of the Laxapana Complex is 354.8Mw and 13 ...
• Detection of elephant intrusion with seismic sensors and machine learning 

  Jayathunga SADS [Thesis-Full-text]

  Human elephant conflict (HEC) is a severe social issue in several Asian countries. A possible approach to prevent HEC is to identify the presence of elephants remotely, thus people can get precautions. This research ...

View more