UoM IR
→
Thesis & Dissertation
→
Faculty of Engineering, Electronics & Telecommunication Engineering
→
Master of Science in Electronics & Automation
→
Browsing Master of Science in Electronics & Automation by Title

Browsing Master of Science in Electronics & Automation by Title

Now showing items 1-20 of 31

Analysis of the performance of MQTT with shared dictionary compression (SDC) in IOT networks

Vinyagamany S [Thesis-Full-text]

The Internet of Things or IOT is a set of organized computing devices that are provided with exclusive identifiers and the ability to transfer data over a network without requiring human-to-human or human-to-computer ...
CMOS leakage power reduction and data retention

Udayanga GWGKN [Thesis-Full-text]

As silicon technology scaling, leakage power dissipation has become the most significant component from all CMOS power dissipation mechanisms. Minimum Leakage Vector(MLV) is used as a combinational logic leakage power ...
Cost savings from enhanced noise reduction based blowdown control for the State Pharmaceuticals Manufacturing Corporation (SPMC)

Jayasundera PD [Thesis-Full-text]

Boilers are widely used in most of the processing industries like Pharmaceuticals Manufacturing, for the heating applications. State Pharmaceuticals Manufacturing Corporation (SPMC) is the one of the largest Pharmaceuticals ...
Design a model and mathematical approach for vectored trust controlled tri rotor aerial platform

Madanayaka HM [Thesis-Full-text]

It is a challenging factor to address the more or less of vectored trust-controlled platforms for Stability. There are unnecessary parts in any UAV plat form and must be identified and apply removal of such parts or ...
Design and implementation of an automatic wire cutting and striping machine for small scale industry

Kanagalingam S [Thesis-Full-text]

The trend in the recent industry is to move towards automation. This is driven by a number of factors such as increasing accuracy and decreasing human errors. This dissertation provides full overview of the development and ...
Design and simulation of fuzzy inference based multiple PID controllers for 6-dof unmanned underwatter vehicle

Makawita, CD [Thesis-Abstract]

Unmanned underwater vehicles are currently being utilised for scientific, commercial and military underwater applications. These vehicles require autonomous guidance and control systems in order to perform underwater tasks. ...
Detection of elephant intrusion with seismic sensors and machine learning

Jayathunga SADS [Thesis-Full-text]

Human elephant conflict (HEC) is a severe social issue in several Asian countries. A possible approach to prevent HEC is to identify the presence of elephants remotely, thus people can get precautions. This research ...
Development of negative pressure wound care system with a novel control concept as an alternative treatment method for non-healing wounds

Abeysinghe, GHTS [Thesis-Abstract]

Negative Pressure Wound Therapy (NPWT) is a noninvasive system that creates a localized, controlled sub atmospheric (negative) pressure environment conducive for wound healing. However, this alternative treatment is yet ...
Empirical formulas to estimate the order of 2-D fir fan filters

Jayathissa RHNS [Thesis-Abstract]

Two-dimensional (2-D) finite impulse response (FIR) fan filters belong to a special class of 2-D filters which has the capability of directional filtering. They are used in many applications such as geological and seismological ...
Feasibility and performance analysis of an inverter based hybrid power generation system

Ashly LGI [Thesis-Full-text]

For rural electrification, the use of off-grid hybrid energy systems based on renewable energy has become an intelligent solution for regions where electricity from the main electricity grid is not profitable or impractical. ...
FPGA Implementation of EEG classifier using LDA

Ellawala NM [Thesis-Full-text]

Design and implementation of feature classification in Electroencephalography (EEG) signal processing system on Field Programmable Gate Array (FPGA) hardware platform is presented in this thesis. Today there is a growing ...
Generic solution for waste generation on short period power drops and fluctuations

Peiris, KRA [Thesis-Abstract]

The research project was conducted in connection with the Waste Project of the candidate's work place, Stretchline Holdings - Global. Stretchline is a multi national company with seven Strategic Business Units (SBU) around ...
Hand activity recognition using a wearable smart glove

Samarasinghe JNG [Thesis-Full-text]

This project is aimed at designing, simulating and constructing a wearable device capable of performing activity recognition to track and monitor activities specific to the manufacturing industry. This was done by designing ...
Instruction set architecture design for video playback device

Neranja, KN [Thesis-Full-text]

Instruction Set Architecture Design for Video Playback Device Keywords: Low Power, Processors, FFmpeg, decoders Application specific processors are being considered for many applications which are used to run on general ...
Jvalue based biomass and growth rate estimation of Duckweed

Wimalaratne DRSK [Thesis-Full-text]

Duckweeds are known as Lemnaceae, comes under the family of small aquatic plants which grows forming a mat covering the surface of the water. Worldwide duckweeds are used as an effective wastewater treatment through ...
Network implementation petri net model for Laxapana power plant complex

Ganegoda DT [Thesis-Full-text]

Laxapana Hydro Power complex consists of five Reservoirs & five Power stations. These power stations are located along the Kehelgamuwa Oya & the Muskeli Oya. The total capacity of the Laxapana Complex is 354.8Mw and 13 ...
New conceptual wireless device for industrial and general purpose automation applications

Conrad, JRT [Thesis-Abstract]

Industrial Automation has greatly improved the industrial processes, efficiency and productivity during the past few decades. Programmable Logic Controllers (PLC) and Microcontrollers are playing a major role in industrial ...
Noice reduction in control signals of industrial sewing machines using adaptive filtering

Niranjan KHVC [Thesis-Abstract]

Control signals of a typical industrial sewing machine are distorted when they are con nected to the controller. Such distortions due to noise appear at the input port of the control signals and they are, in general, ...
A non invasive energy saving system based on a wireless sensor network for split type air conditioners

Kapukotuwe, RWMCMS [Thesis-Full-text]

Energy consumption in air conditioning in supermarkets has been very high. Increase in maximum demand (kVA) has gone up as a result of heavy consumption in air conditioning. Partly, the consumption includes unnecessary ...
A Novel multi-dimensional IIR notch filter for attenuating multiple narrowband interferences

Chandima PKT [Thesis-Abstract]

Notch filters are a class of filters that are used to attenuate narrowband interferences. Previously reported finite impulse response (FIR) or infinite impulse response (IIR) notch filters are predominantly limited to ...

Now showing items 1-20 of 31

Search UoM-IR

Browse

All of UoM-IR
This Collection
- Authors
- Titles
- Subjects
- Faculty
- Acc. No.
- Document Type
- Year
- Conference Proceedings

Browsing Master of Science in Electronics & Automation by Title

Browsing Master of Science in Electronics & Automation by Title

Search UoM-IR

Browse

All of UoM-IR

This Collection

My Account